Eccentric screw pump tube B70V-D in PURE version

for three-phase motors up to 400 Volt

Order number: US-0172-004 + 0172-128
Price: upon request
For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with mechanical seal (GLRD), cardan shaft (GW) and PTFE stator.

Description: The Eccentric screw pump B70V-D in PURE design is a powerful positive...more

Product information "Eccentric screw pump tube B70V-D in PURE version"

Delivery rate: 12 l/min.
Drive shaft: Torsion shaft (TW)
Note: The connection to the discharge connection of the pumping station is made with a Tri-Clamp connection

Description:

The Eccentric screw pump B70V-D in PURE design is a powerful positive displacement pump for medium, high viscosity and viscous media up to the limits of flowability. Depending on the application, various three-phase motors are available, which you can combine with the Pump tube at any time. Thus you are flexible at any time and save important resources.

also available in special immersion depths
Media examples: viscous cosmetic products, food and etc.

Features & Advantages

Uniform volume flow
Easy and fast cleaning
Gentle, low-pulsation product conveying
Smooth running and low wear
Large selection of robust and powerful drive motors
Approved according to ATEX Directive 2014/34/EU, Category 1/2

Technical data

Pump tube (material):

Edelstahl (1.4571/1.4404)

Static seal (material):

FPM (fluororubber)

Mechanical seal (material):

WC, SiC, FPM

Drive shaft (material):

Edelstahl (1.4571)

Stator (Werkstoff):

PTFE (Polytetrafluorethylen)

Rotor (Werkstoff):

Edelstahl (1.4571)

delivery head (up to max. psi)*:

Temperature of medium (max °F):

212

Viscosity (up to max. cps)*:

100000

Type of impeller:

Torsionswelle (mittelviskose Medien)

Seal type:

Mechanical seal (MS)

Immersion length:

from 39" (1000 mm)

Immersion tube diameter (up to mm):

2.1

Statorgröße:

12.1

Druckstutzen (DN):

Explosion Protection:

Connection:

Tri-Clamp

Certification:

FDA-compliant, Verordnung (EG) 1935/2004

Type:

B70V Pure

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter