Eccentric screw pump tube B70V-D Industry

for three-phase motors

Order number: US-0171-121
Price: upon request
For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with Mechanical seal (GLRD), cardan shaft (GW) and PTFE stator.

Description: The Eccentric screw pump B70V 25.1 in the steel version is a powerful...more

Close menu

Product information "Eccentric screw pump tube B70V-D Industry"

Flow rate: 25 l/min.
Drive shaft: Torsion shaft (TS)
Seal type: Mechanical seal (MMS)
Note: Not Ex-approved

Description:

The Eccentric screw pump B70V 25.1 in the steel version is a powerful positive displacement pump for medium, high viscosity and viscous media up to the limits of flowability. Depending on the application, various three-phase and air motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.

Cardan shaft versions also available in special immersion depths of 500 - 2000 mm
Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials

Features & Advantages

Uniform volume flow
Easy and fast cleaning
Gentle, low-pulsation product conveying
Low wear
Ideal for mobile use

Technical data

Pump tube (material):

Stahl (verzinkt)

Static seal (material):

FPM (fluororubber)

Mechanical seal (material):

Kohle, CrMO-Guss, FPM

Drive shaft (material):

Stahl (verzinkt)

Stator (Werkstoff):

NBR hell (Nitrilbutadienkautschuk)

Rotor (Werkstoff):

Steel

delivery head (up to max. psi)*:

116

Temperature of medium (max °F):

176

Viscosity (up to max. cps)*:

100000

Type of impeller:

Torsionswelle (mittelviskose Medien)

Seal type:

Mechanical seal (MS)

Immersion length:

from 39" (1000 mm)

Immersion tube diameter (up to mm):

2.1

Statorgröße:

50.1

Thread (inch) outside:

1 1/2"

Type:

B70V-D

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter