Cookie preferences
This website uses cookies, which are necessary for the technical operation of the website and are always set. Other cookies, which increase the comfort when using this website, are used for direct advertising or to facilitate interaction with other websites and social networks, are only set with your consent.
Lutz Eccentric Screw Pumps
Lutz vertical eccentric screw pumps are suitable for pumping media ranging from aqueous through to highly viscous Newtonian and non-Newtonian media. The pumps are suitable for abrasive media and media containing solids, but also for neutral, aggressive and easily combustible liquids under high pumping pressure.
Optimal Pumping
Perfection of the careful pumping of thin-bodied to highly viscous liquids
Clean results that you can rely on
Pumps - PURE and Sanitary
No results were found for the filter!
Compressed air
Compressed air motor 4/GT
Description The Compressed air motor is suitable for viscous, highly flammable, combustible liquids. Overload proof Features & Advantages high performance and high efficiency due to optimized flow design very good handling due to low weight very good starting behaviour
Three-phase motor with frequency converter
Powerful and quiet three-phase drive with integrated frequency converter. Smooth running and quiet Easy to maintain Protection class IP54 Energy efficiency class IE 3 according to EU regulations 640/2009 and 04/2014 Version with integrated frequency converter for infinitely variable speed adjustment, delivery and discharge mode via display. 230/400 V, 50 Hz Special voltages,...
Motor B 55-T-5 / MA II 5
Description The Motor is suitable for aqueous to slightly viscous, aggressive and outgassing liquids. Depending on the application, various Motors with corresponding voltage are available, which you can combine with the Pump tube at any time. Thus you are flexible at any time and save important resources. Optionally with undervoltage release Externally ventilated Motor Also...
Motor B 55-T-7 / MA II 7
Description The Motor is suitable for aqueous to slightly viscous, aggressive and outgassing liquids. Depending on the application, various Motors with corresponding voltage are available, which you can combine with the Pump tube at any time. Thus you are flexible at any time and save important resources. Optionally with undervoltage release Externally ventilated Motor...
Ex-protection
Compressed air
Oil-free
Compressed air motor MD1xL
without comfort handle
Description The Motor MD1xL is suitable for viscous, highly flammable, combustible liquids up to 100,000mPas. With the oil-free, 1000 Watt powerful Compressed air motor you can achieve the same flow rate as comparable products with 20% less connection pressure and 4% less air consumption. Optionally with comfort handle Explosion-proof Motor according to ATEX guidelines...
Ex-Schutz
Compressed air
Comfort handle
Compressed air motor MD2xL
with comfort handle
Description The Motor MD2xL is suitable for viscous, highly flammable, combustible liquids up to 100,000mPas. With the oil-free, 1000 Watt powerful Compressed air motor you can achieve with 20% less connection pressure and 4% less air consumption the same flow rate to comparable products. Explosion-proof Motor according to ATEX guidelines Oil-free usable Features &...
Electrical
Internally ventilated
Speed control
Universal motor B36 / MI 4
MI4
Description The Motor is suitable for non-flammable, aqueous to slightly viscous liquids. Depending on the application, various Motors with corresponding voltage are available, which you can combine with the Pump tube at any time. This means you are flexible at all times and thus save important resources. Optionally with speed controller to adjust the flow rate Internally...
Motor B 28
Description The Motor is suitable for aqueous to slightly viscous, aggressive and outgassing liquids. Depending on the application, various Motors with corresponding voltage are available, which you can combine with the Pump tube at any time. Thus you are flexible at any time and save important resources. internally ventilated Motor Features & Advantages Optimized cooling...
Motor ME I 6 Silver Star
Description The Motor ME I 6 is suitable for low-viscosity, highly flammable, combustible and outgassing liquids. Depending on the application, various Motors with corresponding voltage are available, which you can combine with the Pump tube at any time. Thus you are flexible at any time and save important resources. Optionally with undervoltage release Externally ventilated...
Three-phase geared motor B4/GT
with circuit breaker
Description The three-phase geared motor B4/GT 4 is suitable for thin-bodied to slightly viscous media. Depending on the application, the Motor can be used for stationary use and plant construction with a cable terminal box or an external circuit breaker. This means that there is only minimal wear and tear and you thus conserve important resources. Ideal solution for long...
Industry
Eccentric screw pump tube HD-E Industry
for oils, paints and disposal liquids
Description: The Eccentric screw pump HD-E in the industrial version transfers the advantages of the Drum pump for low-viscosity media quite simply to the medium-viscosity range. The positive displacement pump has an easily detachable outer tube, a bearing head with mechanical seal and a free-running shaft with an eccentric screw as the conveying element - all easy to...
Food
FPM
Eccentric screw pump tube HD-E in PURE version
for mineral oils, paints, food and cosmetic...
Description: The Eccentric screw pump HD-E in PURE design transfers the advantages of the Drum pump for low-viscosity media quite simply to the medium-viscosity range. The positive displacement pump has an easily detachable outer tube, a bearing head with Mechanical seal and a free-running shaft with an eccentric screw as conveying element - all easy to dismantle and clean....