Pump tube Alu

for mineral oils

Order number: US-0132-300
Price: upon request
the Pump tube is not permissible for the ATEX - range

Description: The Lutz Pump tube (Alu) is suitable thin-bodied, aggressive and...more

Close menu

Product information "Pump tube Alu"

Immersion depth: 700 mm
Type of seal: Sealless (SL)

Description:

The Lutz Pump tube (Alu) is suitable thin-bodied, aggressive and non-flammable media. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. Thus you are flexible at any time and save important resources.

also available in special immersion depths from 200 - 2500 mm
Pump tube equipped with Lutz original hand wheel
Suitable for filling or transferring alternative fuels

Features & advantages

Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Optimized Drum emptying
Universally resistant ETFE shaft bearings
Maintenance without special tools
Seal modules of the mechanical seal (MS) or seal-less (SL) pump can be replaced

Technical data

Pump tube (material):

Alu (Aluminium)

Impeller (material):

ETFE (ethylene-tetrafluorethylene copolymer)

Static seal (material):

no seals in contact with the medium

Mechanical seal (material):

no seals in contact with the medium

Bearing (material):

ETFE

Drive shaft (material):

Edelstahl (1.4571)

Flow rate (up to max. GPM)*:

delivery head (up to max. ft)*:

Temperature of medium (max °F):

212

density (up to kg/dm³):

1.4

Viscosity (up to max. cps)*:

350

Type of impeller:

Axial-flow rotor

Seal type:

Sealless (SL)

Immersion length:

from 19" (500 mm)

Immersion tube diameter (up to mm):

1.6

Thread (inch) outside:

1 1/4"

Type:

Alu 41-R-DL

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter