Drum pump for residual emptying - solvent
for highly flammable hydrocarbons
- Order number: 0151-157 + 0040-200
- Price: upon request
- is suitable for the Ex - area
Motor: ME II 3 - 460W, 230V
Immersion depth: 1000 mm (mechanical seal)
Description:
The Drum pump is suitable for low viscosity, flammable and combustible liquids and hydrocarbons. Perfectly suited for the removal or transfer of explosive media and solvents.
- Optionally available with Ex - plug
- Pump tube equipped with Lutz original hand wheel
- Suitable for Drum emptying alternative fuels, oils, flammable liquids
Features & Advantages
- Optionally with electric or compressed air drive
- No lubricants and therefore no contamination of the pumped medium by lubricants
- Optimized Drum emptying with remaining quantity of approx. 0.1 litres
- No leakage in case of inclined position or repositioning of the pumping unit
- Maximum product utilisation with reduced drum cleaning and disposal costs
- Approved according to ATEX directive 2014/34/EU, category 1/2
| Suitable media: | Essigsäure, Petroleum, Ethanol, Benzin, Butanol, Isopropanol, Kerosin, Methanol, Ameisensäure, Aceton, Äththylacetat, Butylacetat, Nikotin, Toluol, Styrol |
| Pump tube (material): | Niro (Edelstahl) |
| Impeller (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
| Static seal (material): | FEP ummantelt |
| Mechanical seal (material): | Kohle, Keramik, PTFE, HC-4 (2.4610), Edelstahl (1.4571) |
| Bearing (material): | Edelkohle |
| Drive shaft (material): | Edelstahl (1.4571) |
| Flow rate (up to max. GPM)*: | 18,5, 48 |
| delivery head (up to max. ft)*: | 49, 118 |
| Temperature of medium (max °F): | 212 |
| density (up to kg/dm³): | 1,7, 2.8 |
| Operating pressure (max. psi): | 87 |
| Viscosity (up to max. cps)*: | 600, 1000 |
| Type of impeller: | Radial-flow impeller |
| Seal type: | Mechanical seal (MS) |
| Immersion length: | from 39" (1000 mm), from 47" (1200 mm) |
| Immersion tube diameter (up to mm): | 1.6 |
| Thread (inch) outside: | 1 1/4" |
| Type of drive: | Electric, Compressed air |
| Output (W): | 640, 1000 |
| Voltage: | 120 |
| Frequency (Hz): | 60 |
| Version: | mit Unterspannungsauslöser, Komfortgriff |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter