No results were found for the filter!
Drum pump MP-SS with motor B 55-T-5 (120 V)
See details
Suitable for mixing and pumping corrosive and neutral, aqueous up to slightly monitoring in non-explosive areas. Liquid examples: Emulsions, suspensions and dispersions, paints and lacquers Features: Two functions (pumping and mixing and pumping) in one unit No grease fillings Modular, service friendly design Benefits: Change between "pumping" and "mixing and pumping"...
Drum pump MP-PP with motor MA II 3
See details
Suitable for mixing and pumping of corrosive and neutral, aqueous up to slightly viscous liquids in non-explosive areas. Liquid examples: Emulsions, suspensions and dispersions, paints and lacquers, etc. Features: Two functions (pumping and mixing and pumping) in one unit No grease fillings Modular, service friendly design Benefits: Change between "pumping" and "mixing...
Drum pump RE-SS with motor B 55-T-5 (120 V)
See details
Suitable for complete drum drainage with corrosive and neutral, aqueous up to slightly viscous liquids in non-explosive areas. Liquid examples: Alum, borax, diesel fuel, freon, diethanolamine, methylene chloride, perfume oils, trichloromethane, etc. Features: Optimized drum drainage with a residual quantity of approx. 0,1 litres No grease fillings Also available in...
Drum pump RE- PP with motor B 36/MI-4 (120 V)
See details
Suitable for complete drum drainage with corrosive and neutral, aqueous up to slightly viscous liquids in non-explosive areas. Liquid examples: Acids, alkalis, galvanic solutions, hydrazine, phosphates, sulfates, nitrates, etc. Features: Optimized drum drainage with a residual quantity of approx. 0,1 litres No grease fillings Benefits: No problematic tipping for emptying of...
Drum pump HC with motor B 55-T-5 (120 V)
See details
Suitable for highly corrosive chemicals in non-explosive areas. Liquid examples: Bromine, chlorosulfonic acid, chlorine water, hydrofluoric acid, hydrochloric acid, etc. Features: No grease fillings Optimized drum drainage Modular, service friendly design Benefits: Conditionally safe to run dry Lube-free pump tube, thus no contamination of the liquid High resistant pure...
Drum pump SS with motor B 55-T-5 (120 V)
See details
Suitable for corrosive and neutral liquids in non-explosive areas. Liquid examples: Alum, borax, vinegar, freon, diethanolamine, methylene chloride, trichloromethane, etc. Features: No grease fillings Also available in physiologically safe PURE version Benefits: Lube-free pump tube, thus no contamination of the liquid High resistant pure carbon shaft bearing Two impeller...
Drum pump HC with motor ME I 6 (Ex) Silver Star
See details
Suitable for easily flammable liquids and for the use in potentially explosive surroundings. Liquid examples: Buthylchlorid, chlorosulphonic, gasoline, alcohol, amines, benzene, toluene, xylene etc. Features: No grease fillings Hand wheel for quick motor assembly/disassembly and as carry handle Approved according to ATEX Directive 2014/34/EU, Category 1/2 Benefits:...
Electrical
Drum pump
Rotor
Drum pump Lutz B2 Vario PVDF
See details
for higher delivery heads
Description: The Pump Set B2 Vario is suitable for low viscosity acids, alkalis and chemicals. The set is suitable for the removal of small containers such as Canister, hobbocks and drums. The pump is flexible at all times and thus saves important resources. Stepless speed regulator for transferring and filling small quantities Features & Advantages sealless design (DL)...
Electrical
Drum pump
Drum pump Lutz B2 Vario Niro
See details
for liquid lubricants and cleaning agents
Description: The Drum pump B2 Vario is suitable for low viscosity, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times and thus saves important resources. Stepless speed controller for transferring and filling small quantities Features & Advantages sealless design (SL)...
Electrical
Drum pump
Drum pump Lutz B2 Vario PP
See details
for low viscosity acids
Description: The Drum pump B2 Vario is suitable for low viscosity, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times and thus saves important resources. Stepless speed controller for transferring and filling small quantities Features & Advantages sealless design (SL)...
Electrical
Drum pump
Drum pump - concentrated acids and alkalis
See details
for highly chemical liquids and salts
Description: The Drum pump is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for withdrawing or transferring concentrated acids and alkalis. Media examples: Chloric acid, chromic acid, sulfuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite etc. Pump tube equipped with Lutz original handwheel Features & Advantages Optionally with...
Electrical
Drum pump
Drum pump - Mineral oils
See details
for oils and cooling lubricants
Description: The Drum pump is suitable for low viscosity, aggressive and non-flammable media. Perfectly suited for the removal or transfer of mineral oils. Media examples: Diesel, heating oil, hydraulic oil, machine oil and engine oil etc. Pump tube equipped with Lutz original hand wheel Suitable for filling or transferring alternative fuels Features & advantages Optionally...