Pump tube B200 Niro*

for food (PURE series)

Order number: US-0151-401
Price: upon request
The PURE designation includes ATEX, FDA and Regulation (EC) 1935/2004 approvals

Description: The horizontal Pump tube is suitable for emptying aqueous and greasy...more

Close menu

Product information "Pump tube B200 Niro*"

Seal type: Mechanical seal FPM (GLRD)
Version: with Pure
Note: without Ex-approval

Description:

The horizontal Pump tube is suitable for emptying aqueous and greasy food from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps.
Depending on the application different Motors are available,which you can combine with the Pump tube at any time. This means you are flexible at all times and thus save important resources.

Horizontal connection at the bottom run of the container
Pump tube equipped with Lutz original hand wheel
also for foodstuffs containing alcohol, cosmetics and pharmaceutical products as well as flammable cleaning agents

Features & Advantages

Optionally with electric or compressed air drive
Low loss of medium when disconnected
Food grade connections
Low space requirement
Approved according to FDA and regulation (EG) 1935/2004

Technical data

Suitable media:

Lösemittel, Emulsionen, Pflegemittel, Reinigungsmittel, Pflanzenöle, Säuren, Laugen, Wasser, Mineralöle, Desinfektionsmittel

Pump tube (material):

Niro (Edelstahl)

Impeller (material):

ETFE (ethylene-tetrafluorethylene copolymer)

Static seal (material):

FPM (fluororubber)

Bearing (material):

Edelkohle

Drive shaft (material):

Edelstahl (1.4571)

Flow rate (up to max. GPM)*:

64,5

delivery head (up to max. ft)*:

Temperature of medium (max °F):

212

density (up to kg/dm³):

2.8

Viscosity (up to max. cps)*:

1000

Type of impeller:

Axial-flow rotor

Seal type:

Mechanical seal (MS)

Certification:

FDA-compliant, Verordnung (EG) 1935/2004

Type:

B200 Niro 41-R-GLRD

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter