No results were found for the filter!
Ex-protection
DN 25 (1")
max. 10 bar
Mineral oil hose
See details
for oils such as diesel, machine oils and...
Description: The Hose is suitable for petroleum products of all types and super up to 50% aromatics and methanol content. The inner rubber consists of the material NBR and the outer rubber of either CR (Chloroprene) or NBR. The Hose is electrically conductive so that it can also be used in explosive environments. Nominal size: DN 13 / DN 19 / DN 25 / DN 32 / DN 38 / DN 50...
Gas shuttle system
See details
for handling strongly oxidizing or fuming acids...
Description: Harmful gases and vapours remain practically in a closed system when filling or transferring hazardous liquids and provide the necessary pressure equalisation themselves. The sealing plug adapts to different Drum- and container openings (D = 40-75 mm). In conjunction with a Nozzle, it enables safe decanting, even into smaller containers. A non-return valve...
PP
1,5 m
Set accessories
See details
for Drum pump Lutz B2 Vario PP
Description: The set accessory is for low viscosity, aqueous to slightly viscous media. The set is suitable for the B2 Vario pump in PP and stainless steel versions. also available in special lengths on request
Level probe
See details
for dry-running/overflow protection
Description: The limit level probe detects the minimum residual quantities in containers of conductive liquids. It has the function of dry run or overflow protection. simple installation by means of a sensor rod in the Drum Features & Advantages Dry run/overflow protection Emergency stop function of the motor in case of critical filling level Plug & play
Gasket FPM
Dichtung FPM
Check valve Niro
See details
for Container pump B200 Niro
Description: The check valve prevents liquids from flowing back into the pump when stopped. for Container pump B200 Features & Advantages Material: stainless steel (1.4301) / stainless steel (1.4401) Nominal size: DN 32 Prevents the liquid from flowing back into the pump
Turnbuckle
See details
for Container pump B200
Description: The turnbuckle relieves pressure on the discharge spout when heavy engines are used.
Battery
Battery Motor
See details
suitable for B1 Battery
Description: The battery motor B1 Battery is suitable for low viscosity, aqueous to slightly viscous media in laboratory and technical applications. Perfectly suited for the removal or decanting of smallest quantities. Exchangeable, powerful rechargeable battery with Li-Ions Battery life 25 min at maximum speed 1 battery charge empties approx. 2 x 200 litre containers...
Battery
Battery Motor
See details
suitable for B2 Battery
Description: The battery motor B1 Battery is suitable for low-viscosity, aqueous to slightly viscous media in laboratories and technical areas. It is suitable for the withdrawal of small containers such as Canister or hobbocks. Depending on the requirements, the Motor can be used with a wide range of pumping units made of PP, PVDF and stainless steel. Exchangeable, powerful...
0,5 m
Set emission protection Hose
See details
suitable for the gas pendulum system for mobile...
Description: The emission protection hose - set directs rising gases back into the tank in seal-less pumping stations.
Food
DN 19 (3/4")
2 m
Hose set Pure
See details
for watery and fatty food
Description: The hose set is suitable for aqueous and greasy food . The set is used for connection to the Pump tube or the Nozzle. on request also available in special lengths Features & Advantages Hose connection: Tri-Clamp DN 32 Nominal width: DN 19 (3/4")
Food
Ex-protection
DN 19 (3/4")
Hose set Ex-Pure
See details
for watery and fatty food
Description: The hose set is suitable for aqueous and greasy food . The Hose is electrically conductive so that it can also be used in explosive environments. The set is used for connection to the Pump tube or the Nozzle. also available in special lengths on request electrically conductive Features & Advantages Hose connection: Tri-Clamp DN 32 Nominal width: DN 19 (3/4")
NW 150mm
Containder lid
See details
for securing a drum pump when using a drum adapter
Description: The container cover is a device for screwing onto the IBC container. It is used to secure the drum pump when using a drum adapter and an emission protection drum adapter. Nominal size of 150 and 225 Properties & Advantages Material: PE Thread: 2" IG