No results were found for the filter!
Bracket
for Container pump B200
Description: The bracket relieves pressure on the discharge spout when heavy engines are used and the turnbuckle cannot be used.
Akku
Battery
suitable for the Motor B1 Battery
Description: The battery is suitable for the battery motor B1 Battery and consists of high quality Li-Ion cells. 1 battery charge empties approx. 2.6 x 200 litre containers Features & Advantages long life span high cycle stability Voltage: 10,8 V
Charging station for motor B1 Battery
passend für den Motor B1 Battery
Charging station for motor B1 Battery (without Battery) Input: AC 100-240 V, 50/60 Hz
Suspension device
for Motor MD-200
Used for safe storage of the Drum- and laboratory pump B2 Vario. The pumps are thus protected and their utility value is increased.
Nozzle PP
For filling and transferring neutral and aggressive liquids. With protective clip and two outlet nozzles Ø 23 mm (cylindrical) and Ø 12 mm (conical). Housing and valve tappet made of polypropylene (PP). Operating pressure: max. 3 bar at 20 °C Viscosity: max. 760 mPas Flow rate: max. 50 l/min (water) Pumped medium temp: max. 50 °C Weight: approx. 0.25 kg
Nozzle PVDF
For filling and transferring neutral and aggressive liquids. With protective bracket and two outlet nozzles Ø 23 mm (cylindrical) and Ø 12 mm (conical). Body and valve tappet made of polyvinylidene fluoride (PVDF). Operating pressure: max. 3 bar at 20 °C Viscosity: max. 760 mPas Flow rate: max. 50 l/min (water) Pumped medium temp: max. 80 °C Weight: approx. 0,3 kg Seals: FPM
Nozzle Niro
For filling and transferring liquids in the food and pharmaceutical industries, as well as flammable, highly combustible liquids. Housing and valve tappet made of stainless steel (1.4571). With protective bracket and swivel coupling. Operating pressure: max. 3 bar at 20 °C Viscosity: max. 760 mPas Flow rate: max. 50 l/min (water) Pumped medium temp: max. 80 °C Weight:...
Nozzle Brass
For transferring and filling solvents and neutral liquids. Housing and valve tappet made of brass, nickel-plated. With protective bracket and swivel coupling.
Nozzle Alu
For filling and decanting heating oil and diesel. Housing and valve tappet made of aluminium. With protective bracket and swivel joint.
Hose clamps
Hose clamps made of stainless steel with threaded screw for binding the various delivery hoses to the hose connection.
Maintenance unit for compressed air supply
For cleaning and lubricating the supply air. With pressure gauge for setting the operating pressure.