No results were found for the filter!
Drum pump RE-SS with motor B 55-T-5 (120 V)
See details
Suitable for complete drum drainage with corrosive and neutral, aqueous up to slightly viscous liquids in non-explosive areas. Liquid examples: Alum, borax, diesel fuel, freon, diethanolamine, methylene chloride, perfume oils, trichloromethane, etc. Features: Optimized drum drainage with a residual quantity of approx. 0,1 litres No grease fillings Also available in...
Drum pump RE- PP with motor B 36/MI-4 (120 V)
See details
Suitable for complete drum drainage with corrosive and neutral, aqueous up to slightly viscous liquids in non-explosive areas. Liquid examples: Acids, alkalis, galvanic solutions, hydrazine, phosphates, sulfates, nitrates, etc. Features: Optimized drum drainage with a residual quantity of approx. 0,1 litres No grease fillings Benefits: No problematic tipping for emptying of...
Drum pump HC with motor B 55-T-5 (120 V)
See details
Suitable for highly corrosive chemicals in non-explosive areas. Liquid examples: Bromine, chlorosulfonic acid, chlorine water, hydrofluoric acid, hydrochloric acid, etc. Features: No grease fillings Optimized drum drainage Modular, service friendly design Benefits: Conditionally safe to run dry Lube-free pump tube, thus no contamination of the liquid High resistant pure...
Drum pump SS with motor B 55-T-5 (120 V)
See details
Suitable for corrosive and neutral liquids in non-explosive areas. Liquid examples: Alum, borax, vinegar, freon, diethanolamine, methylene chloride, trichloromethane, etc. Features: No grease fillings Also available in physiologically safe PURE version Benefits: Lube-free pump tube, thus no contamination of the liquid High resistant pure carbon shaft bearing Two impeller...
Drum pump HC with motor ME I 6 (Ex) Silver Star
See details
Suitable for easily flammable liquids and for the use in potentially explosive surroundings. Liquid examples: Buthylchlorid, chlorosulphonic, gasoline, alcohol, amines, benzene, toluene, xylene etc. Features: No grease fillings Hand wheel for quick motor assembly/disassembly and as carry handle Approved according to ATEX Directive 2014/34/EU, Category 1/2 Benefits:...
Double diaphragm pump 1 1/2 made of PVDF (PTFE version) (bolted version)
See details
Suitable for highly aggressive liquids Application examples: Suitable for filter presses, tank cleaning systems, pigments and resins. Features: Absolutely oil-free valve technology Absolutely safe to run dry Self-priming, even dry Centre block made of corrosion-free plastic Just a few components, easily accessible Flow rate up to 130 GPM Benefits: No failure of the pump due...
Double diaphragm pump 1/2" made of PP (PTFE version) (bolted version)
See details
Suitable for handling neutral and aggressive liquids Application examples: Suitable for emptying 200 l drums, ink, chemical, solvents, acids and alkalis feed and recirculation. Features: Absolutely free of oil Absolutely safe to run dry Self-priming, even dry Centre block made of corrosion-free plastic Just a few components, easily accessible Flow rate up to 17 GPM...
Double diaphragm pump 1/4 made of PP
See details
Suitable for handling neutral and aggressive liquids Application examples: Suitable for laboratory application, in small plants, requirements for small flow rate with relatively high pressure. Features: Absolutely oil-free valve technology Absolutely safe to run dry Self-priming, even dry Centre block made of corrosion-free plastic Just a few components, easily accessible...
Double diaphragm pump 1/2" made of PP(bolted version)
See details
Suitable for handling neutral and aggressive liquids Application examples: Suitable for emptying 200 l drums, ink, chemical, solvents, acids and alkalis feed and recirculation. Features: Absolutely free of oil Absolutely safe to run dry Self-priming, even dry Centre block made of corrosion-free plastic Just a few components, easily accessible Flow rate up to 17.2 GPM...
Double diaphragm pump 1/2" made of PVDF (PTFE version) (bolted version)
See details
Suitable for highly aggressive liquids Application examples: Suitable for emptying 200 l drums, ink, chemical, solvents, acids and alkalis feed and recirculation. Features: Absolutely free of oil Absolutely safe to run dry Self-priming, even dry Centre block made of corrosion-free plastic Just a few components, easily accessible Flow rate up to 17.2 GPM Explosion-proof...
Double diaphragm pump 1" made of PP (bolted version)
See details
Suitable for handling neutral and aggressive liquids Application examples: Suitable for transfer from drums and containers, transfer of corrosive solutions and chemicals Features: Absolutely free of oil Absolutely safe to run dry Self-priming, even dry Centre block made of corrosion-free plastic Just a few components, easily accessible Flow rate up to 41.2 GPM Benefits: No...